Your PC will not act at all? Hard drive is not detected, the optical drive was slow, the monitor that is not optimal appearance, or a router that is too frequently hangs? Do not panic
Problem: you press the power button to turn on your PC, but PC does not show signs of life. What happened? Solution: If this happens on your PC, there are several possibilities that must be examined one by one gradually.
Check all electrical networks, from the AC outlet to the PSU (power supply unit) on your PC.
Check all electrical networks, from the AC outlet to the PSU (power supply unit) on your PC.
If this is not the cause, then the next new possibilities on your PC.
Make a check of device one by one. What is meant is the CPU and motherboard. Make sure both are still functioning properly. Because let's say if the CPU is damaged, the system will not light at all. Likewise, if the motherboard is damaged. Especially for the affairs of any power source (MOSFET, power lines on the PCB and so on). It will also cause the PC will not react at all.
New Processor What Not Detected
Problem: Install the new processor but not terdeteksi.Tetepi at first boot, it turns out the CPU speed shown in BIOS is not the same as the default rate the new processor.
Solution: If at first boot after replacing the processor, the CPU speed turns out that appear in the BIOS is not the same as the default rate on the new processor will do the checks as follows:
Check back to the CPU if properly installed.
If the CPU is installed correctly, but remain undetected good view, check setting motherboard.Apakah jumpers are installed correctly?
Be careful for this step. At least you should understand the exact position of the CPU view and read the manual prosesor.Jika need to call a technician or a more experienced to assist you.
New Processor What Not Detected
Problem: Install the new processor but not terdeteksi.Tetepi at first boot, it turns out the CPU speed shown in BIOS is not the same as the default rate the new processor.
Solution: If at first boot after replacing the processor, the CPU speed turns out that appear in the BIOS is not the same as the default rate on the new processor will do the checks as follows:
Check back to the CPU if properly installed.
If the CPU is installed correctly, but remain undetected good view, check setting motherboard.Apakah jumpers are installed correctly?
Be careful for this step. At least you should understand the exact position of the CPU view and read the manual prosesor.Jika need to call a technician or a more experienced to assist you.
0 komentar:
Post a Comment