Know the precise definition of overclocking. "Overclocking is the process of forcing a computer component to run at a higher clock rate (the fundamental rate in cycles per second, measured in hertz, at which a computer performs its most basic operations such as adding two numbers or transferring a value from one processor register to another) than designed or designated by the manufacturer"
Understand that not all computers can be overclocked. For one, laptops are pretty much out of the question. Also, any OEM (original equipment manufacturer) computer, such as a Dell, HP or E-machine, will be more difficult to overclock, so your best bet for overclocking is to purchase or build a custom system, but keep in mind that some motherboards can't be used to overclock. Now let's begin.
When overclocking a processor, these are the two factors that can be used to influence the performance. Increasing the bus speed will have the greatest impact as it increases factors such as memory speed (if the memory runs synchronously) as well as the processor speed. The multiplier has a lower impact than the bus speed, but can be more difficult to adjust.
Voltages
Every computer part is regulated to specific voltages for their operation. During the process of overclocking the parts, its possible that the electrical signal will be degraded as it traverses the circuitry. If the degradation is enough, it can cause the system to become unstable. When overclocking the bus or multiplier speeds, the signals are more likely to get interference. To combat this, one can increase the voltages to the CPU core, memory or AGP bus.
.Know the precise definition of overclocking. "Overclocking is the process of forcing a computer component to run at a higher clock rate (the fundamental rate in cycles per second, measured in hertz, at which a computer performs its most basic operations such as adding two numbers or transferring a value from one processor register to another) than designed or designated by the manufacturer".
Ads by Google
Thursday, September 29, 2011
Subscribe to:
Post Comments (Atom)
0 komentar:
Post a Comment